Bush Hog Tough ATH-600 - Manual

Bush Hog
®
TOUGH
Air Tunnel Side Discharge
Finishing Mowers
BUSH HOG ® TOUGH FeATUreS
TOUGH Fabricated 7 Gauge Decks
TOUGH Commercial Grade Greaseable
Spindles
TOUGH Cat 3 Drivelines
TOUGH 5 Year Gearbox Limited Warranty
TOUGH Kevlar reinforced Belt
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 5
Model ATH900
MODeLS ATH600 ATH720 ATH900
Cutting Width 60 inches 72 inches 90 inches
Cutting Height ( 1/2 inch increments) 1 to 6 inches 1 to 6 inches 1 to 6 inches
Tractor HP range 15 - 35 PTO 20 - 40 PTO 35 - 55 PTO
Type Hitch Category I Category I Category I
Size Blades 1/4 x 2 1/2 x 21 inches 1/4 x 2 1/2 x 25 inches 1/4 x 3 x 31 1/2 inches
Number of Blades 3 3 3
Blade Tip Speed 18,231 FPM 18,272 FPM 15,621 FPM
Blade Overlap 1 1/2 inches 1 1/2 inches 2 1/4 inches
Blade Uplift Parallel Parallel Parallel
Driveline Size ASAE Category 3 ASAE Category 3 ASAE Category 3
Front roller Size (optional) 3 x 5 inches 3 x 5 inches 3 x 5 inches (2)
Discharge Right Side Right Side Right Side
Deck Plate 7 gauge 7 gauge 7 gauge
Tire Size 3 1/4 x 10 1/4 inches (solid tire) 3 1/4 x 10 1/4 inches (solid or pneumatic tire) 13 x 5 inches (solid or pneumatic tire)
Belt “B” Size Kevlar “B” Size Kevlar “C” Size Kevlar
Gearbox 45 HP 45 HP 55 HP
Tractor PTO Speed 540 RPM 540 RPM 540 RPM
Belt Adjustment Spring Loaded Idler Spring Loaded Idler Spring Loaded Idler
Approximate Weight 570 lbs 610 lbs 1164 lbs
Options Front Roller Front Roller Front Roller
Roller Bearing Kit Roller Bearing Kit Roller Bearing Kit
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
FeATUreS Floating top link • High blade tip speeds • Available in major tractor colors