Breville JC7 - Manual (Page 4)

BEFORE FIRST USE
Remove all promotional labels and wash
the juicer components in warm, soapy water.
Dry thoroughly.
1. Place the filter surround on the motor
base then sit the stainless steel strainer
dish on top of the filter surround.
2. Fit the small cone (fig 1) onto the drive
shaft and push down lightly. For larger
fruits, place the large cone on top of the
small cone, after the small cone has
been correctly positioned onto the
drive shaft (fig 2).
3. Ensure that the anti-drip stop is
pushed down.
4. Plug the juicer into a 230/240v power
outlet and switch on.
5. Cut the citrus fruit in half and press
fruit down onto the cone.
The motor will automatically start and
the juicing cone will begin to rotate.
To stop, lift the fruit off the cone.
Juicing will automatically stop.
HANDY HINTS
• • Move the fruit from side to side against
the cone whilst juicing to extract
maximum juice.
• • More juice is obtained from fruit juiced
at room temperature.
6 7
DO NOT PRESS SO HARD AS TO STOP THE MOTOR.
• • After each use, switch off the juicer at
the power outlet and unplug.
• • Disassemble the unit and wash all
removable parts in warm, soapy water.
• • Do not place these parts in the
dishwasher as the high water temperature
and harsh detergents will ultimately warp
or scratch these parts. It is best to rinse
or wash all removable parts immediately
as dried citrus pulp is difficult to remove
and may stain. If any staining does occur,
wipe the affected part/s with undiluted
dishwashing liquid and rinse thoroughly.
• • Wipe the motor base with a damp cloth.
CARE AND CLEANING
Never immerse the motor
base in water or any other
liquid. Do not use harsh
abrasives or detergents.
fig.1
fig.2
OPERATING YOUR BREVILLE JUICER