Bissell Powerforce compact 23T7 series - Manual (Page 5)

A
ssembly
This user’s guide has been designed to help
you get the utmost satisfaction from your Easy
Vac or PowerForce Compact vacuum. You’ll
find assembly and operating instructions,
safety precautions, as well as maintenance
and troubleshooting instructions. Please read
this guide thoroughly before assembling your
vacuum cleaner.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly.
Familiarize yourself with the parts and where
they go. Following this user’s guide will
greatly enhance your ability to get the most
performance from your vacuum for many years.
Your vacuum comes in two, easy-to-assemble
components: the handle and the base.
1. Position the handle so the lower snap is
facing the back of the vacuum.
2. Line up the holes on the base with the
snap and knob on the handle.
3. Insert the handle into the base and push
until you hear it lock into place.
Note: The handle is designed
so only the correct snaps will fit
comfortably with the holes in the
base. Do not use excessive force
while assembling this vacuum. It
should fit together with ease.
4. To install the lower cord wrap hook, insert
the bottom clip of the U-shaped cord wrap
hook, with the U-shape facing downward.
Push the cord wrap hook upward to secure.
5. Wrap power cord around cord wraps and
place attachments in their correct holders.
Your vacuum assembly is now
complete.
Handle position
Press the handle recline pedal with
your foot to place your vacuum in one
of three positions.
1. Upright- For storage and transporting.
2. Normal Cleaning- Press handle release
pedal once. Use for most household floor
cleaning tasks.
3. Low Cleaning- With the vacuum in normal
cleaning position, press handle release
pedal again. Use for reaching under low
furniture, such as tables, chairs, or beds.
5
Stretch Hose
Base
Product
images
may vary
Product images
may vary
Dusting/
Upholstery Tool
(select models)
Crevice Tool
1.
2.
3.
WarNINg:
Do not plug in your vacuum clean-
er until you have completely assem-
bled it per the following instructions
and are familiar with all instructions
and operating procedures.
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Accessory
Storage
(select
models)
Handle
Lower Snap
Cord Wrap
Hook
4.