Buffalo Technology Buffalo AirStation Pro Intelligent WLM2-G54 - Manual (Page 14)

9
5. After finding an AirStation, select Admin /
Set IP address.
6. Either enter the IP and Subnet Mask
address in the boxes or select DHCP.
7. Leave the Password box empty. Click OK.
8. IP address setup is complete.
8.5 Setup Screen
1. Highlight the WLM2-G54, click the
"Admin" button, then the "Configure
AirStation" tab to open the setup screen.
In the password page, enter the following
information:
User Name: root
Password: [leave blank]
Click OK.
2. Select the language you want to use.
English and Japanese are available.
Figure 8.6.4 Security Settings
Figure 8.5 Setup Screen