Philips Aspirador con bolsa - Manual (Page 8)

Using the appliance
Vacuum cleaning
You can carry the vacuum cleaner by the handle at the front or on top of the appliance (Fig. 9).
1 Pull the cord out of the appliance and insert the mains plug into the wall socket.
2 Press the on/off button on top of the appliance with your foot to switch on the appliance.
If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park
the tube in a convenient position (Fig. 10).
Adjusting suction power
You can adjust the suction power with:
the suction power slide on the handgrip or (Fig. 11)
the electronic suction power control on the vacuum cleaner (specific types only) (Fig. 12).
replacement
Replacing the dustbag
Always unplug the appliance before you replace the dustbag.
Replace the dustbag as soon as the dustbag-full indicator on top of te appliance has changed colour
permanently.
1 Open the cover (Fig. 13).
2 Push the cardboard tag of the dustbag backwards (Fig. 1).
3 Pull the cardboard tag upwards to lift the dustbag out of the appliance. (Fig. 15)
The dustbag is sealed automatically.
 Place the bottom edge of the new dustbag in front of the ridge on the bottom of the
appliance (1). Pull the cardboard front of the dustbag towards you (‘click’) (2). (Fig. 16)
5 Close the cover.
Replacing filters
Always unplug the appliance before you replace a filter.
Your vacuum cleaner is equipped with either a Micro Filter or a HEPA Filter.
Micro Filter (specific types only)
Replace the Micro Filter every 6 months.
1 To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 17).
2 Remove the filter holder from the grille.
3 Remove the old filter from the grille.
 Put the new filter on the grille and lock it into place with the filter support (Fig. 18).
5 Put the filter grille back into the appliance (1) and turn it clockwise (2) (Fig. 19).
HEPA Filter (specific types only)
Replace the HEPA Filter every 6 months.
1 To remove the filter grille, turn it anticlockwise (1) and pull it out (2) (Fig. 17).
2 Remove the HEPA Filter (Fig. 20).
3 Insert a new HEPA Filter.
-
-
-
-
,
English 8