Bravetti PLATINUM PRO EP595H - Manual (Page 6)

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
3. Press the mixer head release button
and hold while pushing the mixer
head downwards with the selected
attachments in place. (Fig. 5)
Mixer Head
Release Button
Fig. 5
TIP: Start mixing at slow speeds and
increase speed gradually to prevent
ingredients splashing out of the mixing
bowl. When adding dry ingredients,
particularly flour, lower the speed
temporarily until ingredients are
combined.
TIP: When kneading yeast doughs, use
‘LOW’ speed to achieve best results.
Selecting the Mixing Bowl Speed
1. The mixing bowl automatically turns
when the On/Off beater speed
selector is turned on. Most tasks
will require the ‘LOW’ speed
setting.
2. To select the ‘HIGH’ bowl
speed turn the bowl speed
selector clockwise
towards ‘HIGH’. This
setting is best used for maximum
performance required for dishes such
as meringue, and cakes.
NOTE: The mixture passes through the
beaters more often yielding faster results.
For large volume mixtures the bowl
speed should be set at ‘LO’.
3. When mixing is complete, turn the
On/Off beater speed selector to the
“Off” position and unplug the unit.
Using the Mixer
Warning: To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.
1. With the On/Off - beater speed
selector in the “Off” position, plug the
power cord into a 120 volt power
outlet.
NOTE: The power indicator light will now
be illuminated.
2. Use the On/Off – beater speed
selector to turn the unit on and off and
to control the speeds for mixing.
(Fig. 6)
Fig. 6
On/Off-Beater
Speed Selector
HIGH-LOW Bowl
Speed Selector
Power
Indicator
Fig. 4
Lock Unlock
1. Press the mixer head release button,
located on the side. While the button
is depressed, ease the mixer head
back.
NOTE: The mixer head will lock in the
‘tilt’ position.
2. Place the mixing bowl onto the metal
base so that it is sitting evenly. Lock
the bowl into place by turning it
clockwise. (Fig. 4)
Warning: To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.
Fitting the Bowl onto the Base
4
1. Hold down the mixer head release
button and ease the mixer head back
until it locks into position.
2. To remove the attachments, loosely
hold the beater shafts while pressing
down on the beater eject button.
(Fig. 7)
Fig. 7
3. The beaters will gently release from
mixing head.
MIXING GUIDE
“HIGH” 9 & 10
Whipping &
Aerating
“LOW” 5 or
“HIGH” 6 - 8
Creaming &
Beating
“LOW” 3 & 4 Light Mixing
“LOW” 1 & 2
Folding &
Blending
RECOMMENDED
SPEED(S)
MIXING
TASK
Note:
• Always select the speed setting
before the mixing bowl speed to
prevent ingredients from being flicked
out of the mixing bowl.
• Always start mixing at slow speeds
and increase the speed gradually to
prevent the ingredients splashing out
of the bowl.
Beater
Eject
Button
Warning: To avoid injury when inserting
or removing beaters or dough hooks,
always set the speed selector to the
“Off” position and unplug the appliance.
Removing the Beaters/Dough
Hooks
To use your mixer most efficiently use
the mixing guides below.
Mixing Guide
5