Philips Purificador de agua para grifo - Manual (Page 14)

Question Answer
Why is the water
flow is weak at the
filtered setting?
Perhaps the filter cartridge is clogged. Replace
the filter cartridge.
Perhaps the tap water pressure is lower than
specified.
Product specifications
Product name and
type number
Pure water on tap WP3861
Type Direct tap mount
Major filter
components
Silver-coated granular activated carbon
Initial water flow rate 2ltrs/min. (water pressure at 1kgf/cm²
(10 metres of water column/ 100kPa), water
temperature at 20°C)
Chlorine reduction
capacity
WP3961-2,500ltrs (water density at 2ppm)
Filter lifetime Approximately 6 months at 10ltrs a day
(the actual lifetime depends on the quality of
the local water and the water pressure)
Replacement filter
cartridge
WP3961
Minimum water
pressure
0.7kgf/cm² (7 metres of water column/70kPa)
English 1
4222.002.6611.2.indd 14 06-09-2006 14:34:27