Brother HL-5280DW User Manual
Network user’s guide
Advertising
Table of contents
Document Outline
- Introduction
- Configuring your network printer with an Ethernet cable connection
- Configuring your wireless network printer (HL-5280DW only)
- Overview
- Wireless network terms and concepts
- Configuring your printer for a wireless network
- Changing the print server settings
- Using the BRAdmin Professional utility to change the print server settings (for Windows® only)
- Using the control panel NETWORK menu to change the print server settings
- Using the HTTP (web browser) to change the print server settings
- Using other methods to configure your printer for a wireless network
- Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- Network printing from Windows®: NetBIOS Peer-to-Peer printing
- Internet printing for Windows®
- Network printing from Macintosh®
- Control panel setup
- Overview
- Changing the print server settings using the control panel NETWORK menu
- Printing the Printer Settings Page
- Restoring the network settings to factory default
- Disabling the APIPA protocol
- Troubleshooting
- Wireless installation in ad-hoc mode (HL-5280DW only)
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS* to configure the IP address
- Appendix B
- Index