Brother 1810 - Manual (Page 57)

53
STYLE FUNCTION
You can choose from nine different character styles to apply to your text.
☞
Characters printed using the smaller sizes may be difficult to read if certain style
settings (e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL I+BOLD (italic & bold)
BOLD I+OUTLINE (italic & outline)
OUTLINE I+SHADOW (italic & shadow)
SHADOW VERTICAL
ITALIC
The default style setting is NORMAL. The style indicator at the bottom right of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to
Reference at the end of this section for samples of the available settings.
To change the style setting:
1 While holding down , press once, and keep held down to dis-
play the current style setting.
2 While still holding down , continue pressing until the desired style set-
ting is displayed.
☞
The current style setting is shown by the style indicator at the bottom right of
the display.
3 Release to apply the selected style setting to the entire text.
EXAMPLE
To select the I+SHADOW style setting:
1 While holding down ,
press once, and keep
held down.
Style
Style
Style
N O R M A L
S T Y L E Alt
Caps Frame
Underline
Length
Auto
Font 1 Font 2