Brother 1810 - Manual (Page 12)

8
ATTACHING LABELS
LAMINATED TAPE
The enclosed stick enables you to easily remove the backing from labels printed on lami-
nated tapes.
1 Hold the tape in your left hand, with the printed surface facing up, and hold the
stick in your right hand.
2 Pass the tape halfway through the long narrow hole in the stick.
3 Turn the stick three-quarters of a turn towards you and pull the stick away from you
as shown below.
4 Peel off the label backing.
FABRIC TAPE
Fabric tape is used to attach a piece of fabric printed with your text onto garments using
an iron. After printing the text onto fabric tape and cutting off the label using scissors,
place the label on an ironed garment at the location where you wish to attach it in such a
way that the printed text can be read correctly. Cover the label with another piece of
cloth and use an iron set to a medium-high temperature (320 to 356 ˚F (160 to 180 ˚C)) to
press down firmly for 10 to 15 seconds. For more details, refer to the instructions
included with the fabric tape cassette.
STAMP TAPE
Refer to pages 45 through 48 for a detailed explanation on using the stamp tape to make
stamps.
GH
ABCDEF
ABCDEF