Philips AVENT Vigilabebés DECT - Manual (Page 15)

15
6.4 Night dim mode
In night dim mode, the light intensity of the lights
and the display is reduced and the volume of alert
sounds is decreased.
1
Press the night dim button to activate the
night dim mode.
• The night dim mode symbol appears on the
display.
• The sound level lights and the link light are
dimmed.
• The backlight of the display is dimmed.
• The volume of any sound alerts set on the
parent unit is reduced.
2
To switch back to normal operating mode,
press the night dim button again.
• The night dim mode symbol disappears
from the display.
• The sound level lights and the link light
return to their normal brightness.
• The backlight of the display lights up fully
again.
• The sound alerts go off at the normal sound
level.
D Note:
If the volume is off, only the sound level
lights show that the baby produces
sounds.
6.3 Talk function
You can use the TALK button on the parent unit
to talk to your baby (e.g. to comfort your baby).
1
Press and hold the TALK button and talk
clearly into the microphone on the front of
the parent unit from a distance of 15-30cm
(0.5-1ft).
D Note:
If you have set the volume for the lullaby
higher on the baby unit, the sound will also be
louder when you use the talk function on the
parent unit.
• The ‘link’ light starts flashing green and the
message ‘TALK’ appears on the display.
2
Release the TALK button when you have
finished talking.
ENGLISH