Bosch DVR1EP32A - Manual (Page 20)

20
SECTION 5: DVR1 ADVANCED MENU PROGRAMMING
5.1 Overview of the DVR1 Advanced Menu
Enhanced DVR1 operating features are programmed via the Advanced Menu. The following table provides a
summary of these actions that are accessed via the DVR1 Advanced Menu.
Press MENU to enter the DVR1 Main Menu. Use the Left/Right Arrows to highlight the ADVANCED MENU
title and press ENTER. The Advanced Menu (shown below) appears.
IMPORTANT NOTE: Please review the information in Section 3 regarding navigation through the DVR1
menus. Advanced Menu programming should be designated to qualified systems personnel only.
5.2 DVR1 Passwords
The DVR1 Series is equipped with two (2) passwords.
The first password provides access to the DVR1’s Advanced Menu. This password can be changed by the System
Administrator to prevent unauthorized access to the Advanced Menu functions. Store the password in a secure location.
The default password for the Advanced Menu is 0000, as stated in Section 5.11. The second password is used to set
the DVR1 to its original factory default settings. This password cannot be altered and is set (permanently) at 0000.
Accessing the Advanced Menu Using the Password
1. Select ADVANCED MENU from the Main Menu, then press
ENTER. The Password Box appears.
2. Enter the Advanced Menu password. Use the Up/Down
Arrows to select a character, then press ENTER to move to the
next character.
3. Pressing ENTER on the last character completes password entry. If the password was correctly entered, the
Advanced Menu is displayed.
DISK OVERWRITE MODE
DISK MAINTENANCE
AUDIO RECORD SETTING
AUTO DELETE MODE
COMMUNICATIONS
MULTIPLEXER FORMAT
ADJUST PICTURE
FRONT PANEL LOCK
FACTORY SETTINGS
CHANGE PASSWORD
User Action Corresponding Menu Item/Sub-menu
Overwrite the Hard Disk DISK OVERWRITE MODE
Erase, Delete, and Recover Hard Disk Data DISK MAINTENANCE
Invoke Audio Recording AUDIO RECORD SETTING
Use the Auto Delete Feature AUTO DELETE MODE
Configure Communications COMMUNICATIONS
Configure Multiplexer Format MULTIPLEXER FORMAT
Adjust Picture Qualities ADJUST PICTURE
Lock Out the Front Panel FRONT PANEL LOCK
Restore Factory Defaults FACTORY SETTINGS
Change the Password CHANGE PASSWORD
PASSWORD BOX
PLEASE ENTER THE PASSWORD!
– – – –