3 get started, Mount the stand 1, Connect fm antenna 1 – Philips Elegante microcadena User Manual

Page 10: Connect speakers

Advertising
background image

EN

9

English

3 Get

started

Caution

Use of controls or adjustments or performance of

procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Mount the stand

1

Lay down the main unit and then slide the

base in the slot until it is fi xed.

Connect FM antenna

1

Connect the supplied FM antenna to the

FM AERIAL socket on the back of the
main unit.

Connect speakers

Note

Ensure that the colors of the speaker wires and

terminals are matched.

1

Hold down the socket fl ap.

2

Insert the stripped part of the wire

completely.

Insert the right speaker wires to

“RIGHT”, left speaker wires to
“LEFT”.

L

R

Advertising
This manual is related to the following products: