Brother FAX-2480C - Manual (Page 58)

Chapter 7
42
Tone or Pulse (Canada only)
7
If you have a Pulse dialing service, but need
to send Tone signals (for example, for
telephone banking), follow the instructions
below:
a
Do one of the following:
„ (FAX-2480C) Pick up the handset or
press Hook/Hold.
„ (FAX-2580C) Pick up the cordless
handset and press
(Talk) or press
Speaker Phone on the machine.
b
Press # on the machine’s control panel.
Any digits dialed after this will send tone
signals.
When you hang up, the machine will return to
the Pulse dialing service.
Fax/Tel mode when the power
key is on
7
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (pseudo/double-
ringing) to alert you to pick up a voice call.
(FAX-2480C) If you are at the machine, you
can lift the handset.
(FAX-2580C) Use the cordless handset or
press Speaker Phone on the machine to
answer.
If you are at an extension phone, you'll need
to lift the handset during the F/T Ring Time
and then press # 5 1 between the
pseudo/double rings. If no one is on the line,
or if someone wants to send you a fax, send
the call back to the machine by pressing
l
5 1.
Fax/Tel mode when the power
key is off
7
You can change the default setting of the
On/Off key to Fax Receive:On so that you
can receive faxes when the power key is off.
(See On/Off setting on page 18.) Fax/Tel
mode will work in the following ways.
When the machine is in Fax/Tel mode and
pseudo/double-rings to tell you to pick up a
voice call, you can only answer by picking up
the machine’s handset or cordless handset
and pressing (Talk).
If you answer before the machine
pseudo/double-rings, you can also pick up
the call at an external or extension phone.