7 monitoring and maintenance, 1 monitoring the system, Monitoring and maintenance – Bosch DSDA ISCSI DISK ARRAY SERIES DSA-S5B50 User Manual
Page 25: Monitoring the system, 7monitoring and maintenance
DSDA iSCSI Disk Array Series
Monitoring and Maintenance | en
23
Bosch Security Systems
Installation Guide
V 1 | 2008.08
7
Monitoring and Maintenance
7.1
Monitoring the System
7.1.1
Using the FilerView Monitor
The system should be monitored. An overall system status monitor is provided by the
FilerView administration interface.
1.
Connect to the FilerView interface as described in Section 5 Configuration through the
2.
In the navigation panel, select Real Time Status > Health Monitor.
The overall Health Monitor opens in a new browser window.
Keep this window open and check the status regularly.
3.
In the navigation panel, select Real Time Status > Filer At-A-Glance.
Data traffic, CPU load etc. are visualized here.
7.1.2
Logs and Reports
1.
Connect to the FilerView interface as described in Section 5 Configuration through the
2.
In the navigation panel, select Filer > Report.
A general report on the system displays.
3.
In the navigation panel, select Filer > Syslog Messages.
The log file for all system messages displays.
4.
In the navigation panel, select Network > Report.
Information on the network displays.
5.
In the navigation panel, select LUNs > iSCSI > Report.
The iSCSI status and further information displays.
i
NOTICE!
You can find more detailed documentation on
www.boschsecurity.com under Product Catalog > CCTV > IP Video > Disk Arrays.