Philips SatinPerfect Depiladora - Manual (Page 17)

Problem Cause Solution
The overload
protection is activated
because something
got caught between
the rotating tweezers
or because you
pressed the appliance
too hard onto your
skin.
When the overload protection has been activated,
the speed setting indications flash red. Turn the
tweezers with your thumb until you can easily
remove the item that is blocking the rotating
tweezers. Then switch on the appliance again. Do not
press the appliance too hard onto your skin.
The precision
epilator does not
work.
The batteries are
empty or have been
inserted incorrectly.
Replace the batteries or insert them correctly (see
‘Inserting the batteries’ in chapter ‘Using the precision
epilator’).
EnglisH 17