Bogen WB8 User Manual
Page 2
50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Ceiling Grilles
(Use for PG8U) The ceiling speaker grille shall be a Bogen model PG8U steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.
(Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in off-white semi-gloss enamel. Mounting hardware shall be included.
(Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13",
the speaker mounting studs shall be hidden, and the grille shall be low profile and finished in bright white
semi-gloss enamel. Mounting hardware shall be included.
WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing
an 8" cone-type loudspeaker and angled (13.5 degrees) for additional downward sound dispersion. The baffle
shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be
used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware
for mounting the speaker to the baffle shall be supplied. Overall dimensions shall be 9-1/2" W x 9-1/2" H x
5-1/4" D (top) x 3-1/4" D (bottom).
Architect
and Engineer
Specifications