Operating instructions, Speed settings – Bravetti PLATINUM PRO EP552HR User Manual

Page 4

Advertising
background image

OPERATING INSTRUCTIONS

Before using your Bravetti Platinum Pro
Hand Mixer for the first time, wash the
beaters, dough hooks and whisk in warm,
sudsy water. Rinse and dry thoroughly.

Warning:

To avoid injury when inserting

or removing beaters, dough hooks or
whisk always set the speed selector on
”0" and unplug the appliance.

Warning:

The unit is designed for

intermittent use. The maximum operating
time on settings “1-3” in the "Lo" range is
10 minutes non-stop with beaters, dough
hooks, or whisk. The maximum operating
time on settings “1-3” in the "Hi" range is
30 seconds non-stop with beaters, dough
hooks, or whisk.

Beaters, Dough Hooks, Whisk:

Select the attachment according to the
type of mixing required. Make sure that
the mixer is unplugged from power
source and speed selector is set on ”0"
before inserting or removing beaters,
dough hooks or whisk

.

Beaters:

Use for liquid mixes such as creams,
egg-whites, confectionery doughs, etc.
Insert stem end of beaters (one at a time)
into the openings in the mixer. Insert the
beater with the locator ring in the larger
of the two holes. The ring on the beater
must sit below the surface of the mixer
housing. To ease the inserting of the
beaters, a slight twisting motion will aid in
engaging the beater drive tabs. Install the
second beater in the same manner as
above.

Whisk:

The whisk is used to beat air into
mixtures such as egg whites, yolks or
cream.
To insert whisk: There is only one whisk
provided. Hold whisk at stem end and
insert into one of the holes until it clicks
into place. DO NOT PUSH WHISK IN
FROM THE WIRE END AS WIRES
MAY BE DAMAGED.

Warning:

Never operate the appliance

without all the parts in place. Make sure
that all parts are properly assembled
before turning on the unit.

Bottom View

Large Opening

Locator

Ring

Dough hooks:

Use for light doughs. Insert dough hooks
in the same way as beaters. See
installing instructions for beaters in
previous section. Always use both dough
hooks. Never try to work with one beater
and one dough hook at the same time.
Do not use dough hooks at low speeds
as this may cause motor to overheat.
When using dough hooks for heavy or
thick dough, use only high speed (3) from
the beginning to prevent the motor from
overheating (blocking).

Locator

Ring

Beater

OPERATING INSTRUCTIONS

To Operate the Hand Mixer

Gently pull the power cord from the
main unit.

Caution:

Do not pull with force on the

power cord or you will damage the
rewinding feature and void the warranty.
When rewinding, always hold the plug to
avoid cord whipping.

Before plugging in the unit, fit the
desired attachment required for the
mixing operation to be carried out.

Insert the beaters or the dough hooks
one at a time by pressing them gently
upwards until they are fully fitted and
you hear a click. Make sure that the
attachment with the locator ring is
inserted into the larger hole opening.
(See illustration below.)

To Operate the Hand Mixer

(cont.)

When you have inserted the desired
attachment, insert the plug into the
electrical outlet.

Pick up the mixer and use your thumb
to set the speed selector and the
Hi/Lo range selector to the setting that
you desire.

Warning:

The unit is designed for

intermittent use. The maximum operating
time on settings “1-3” in the "Lo" range is
10 minutes non-stop with beaters, dough
hooks, or whisk. The maximum operating
time on settings “1-3” in the "Hi" range is
30 seconds non-stop with beaters, dough
hooks, or whisk.

We suggest that you begin at the
highest speed to prevent the motor
from blocking.

Ensure that the beaters are
completely free to move in your
mixture.

Return to "0" setting when you have
finished using the mixer or you wish
to stop.

To remove the attachments from
the mixer, press the accessory eject
button. This button only works when
the mixer is in the "0” speed setting.

To rewind the power cord, push the
cord rewind button.

Caution:

When rewinding, always hold

the plug to avoid cord whipping.

SPEED SETTINGS

HI/LO RANGE SETTINGS

SPEED SELECTOR

"LO"

"HI"

"0"

Off

Off

"1"

Lowest

High-Middle

"2"

Low

High

"3"

Low-Middle

Highest

Bottom View

Large Opening

Locator

Ring

Read all the sections of this booklet and follow all the instructions carefully.

4

3

Advertising
This manual is related to the following products: