Bissell STEAM 'N CLEAN II 1865 - Manual (Page 10)

Insert new filter by sliding the Filter along the bottom of the
unit until the water outlet aligns with the inlet on the machine.
Replace Water Tank by sliding into place and securing latch.
Use only BISSELL Water filters in your BISSELL
Steam ‘n Clean II steam cleaner. To locate a retailer near you, or to place
an order, call
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 7 p.m. EST
Saturday
9 a.m. — 2 p.m. EST
Or visit out Website @ http://www.bissell.com
3.
10
4.
Troubleshooting
Water release from safety valve.
Possible Causes Remedies
Blocked Steam Nozzle Turn off steam cleaner, unplug CID
plug from outlet. After unit has cooled,
clear blockage by inserting a paper clip
into the brass spray tip.
Reduce steam or no steam.
Possible Causes Remedies
Water Tank empty Fill Tank
Depleted Water Filter Replace filter
Damage to Heating Element Call BISSELL Consumer Services
If suggested solutions for this or any function of your steam cleaner do not
correct the problem, call BISSELL Consumer Services.
WARNING:
To reduce the risk of
fire,electric shock
or injury, unplug
appliance from outlet
before servicing.
Replacing The Water Filter
Replacement Filter