Bosch 8-Dec - Manual (Page 128)

120 | Arming Devices | Conventional
SE 50 GLT SmartKey
Blocking Unit
Features
▶ The SE 50 conventional control unit is programmable
via the control panel
▶ The SPE blocking element is controlled via the
intrusion control panel
▶ The SPE blocking element is suitable for various types
of doors
The SmartKey blocking unit (conventional) is used to
mechanically lock doors.
System Overview
1 SPE Blocking element
2 SE 50 conventional (GLT) control unit
3 Bolt contact
Functions
The SE 50 GLT control unit controls the blocking element
depending on the state of the bolt contact and/or the
intrusion control panel. When the door is closed (bolt
contact is activated), the bolt of the blocking element is
automatically engaged. When the door is unlocked, the bolt
is disengaged if the detection area is disarmed. When the
detection area is activated, the bolt remains engaged, thus
preventing unintended access to the area. If no bolt contact
is present, the bolt of the blocking element is engaged by
the activation signal issued by the control panel.
SE 50 GLT
The SE 50 conventional (GLT) control unit processes the
status reports of all components in the system,
communicates these reports to the intrusion alarm system
and controls the blocking element. The control unit is
mounted in the secure area.
SPE blocking element
The SPE blocking element is an additional lock for the door
and is intended to prevent unauthorized entry to the armed
area. The blocking element must always be mounted in the
secure area with a kit to allow it to be fitted out for different
door types.
A conventional bolt contact should be fitted to the control
unit (not part of the scope of delivery).
A conventional standard magnet contact can be connected
to the control unit (not part of the scope of delivery).
Certifications and Approvals
Region Certification
Europe CE SE 50 GLT
SmartKey
Germany VdS G 106066, C SE 50 GLT
Installation/Configuration Notes
The blocking element is always mounted in the secure area
with a mounting kit.
Parts Included
Type Qty. Component
SE 50 GLT 1 Control unit
Technical Specifications
SE 50 GLT control unit
Bosch Security Systems B.V. www.boschsecurity.com
4