Peaker connections (bridged), En gl is h, Ela amplifiers – Bazooka ELA265 User Manual

Page 13: Caution

Advertising
background image

12

S

PEAKER CONNECTIONS (BRIDGED)

The ELA amplifiers are capable of being bridged in a mono configuration. This feature

allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel.

In this configuration the amplifier sums the right and left channel to deliver one channel

(mono) output.

Please note: in order for the amplifier to sum right and left signal information, both right
and left RCA connections must be made.

**CAUTION!

In the bridged mode, the amplifier must see the recommended minimum

impedance or higher. Any lower than the recommended minimum impedance will cause the
amplifier to overheat and possibly cause permanent damage to the amplifier!

ELA465 BRIDGED SPEAKER CONNECTIONS

EN

GL

IS

H

ELA AMPLIFIERS

FUSE

25A

SPEAKERS

BRIDGED

+12V

PROTECT

POWER

GND

REM

LEFT

RIGHT

+

+

-

-

8 Ohm

(4 Ohm Minimum)

8 Ohm

(4 Ohm Minimum)

BRI

BRI

FUSES

25A

25A

SPEAKERS

PROTECT

POWER

+12V

GND

REM

CH1

CH3

CH2

CH4

8 Ohm

(4 Ohm Minimum)

8 Ohm

(4 Ohm Minimum)

ELA265, ELA2100 & ELA2150 BRIDGED SPEAKER CONNECTIONS

Advertising
This manual is related to the following products: