Blaupunkt SAN FRANCISCO RDM 169 - Manual (Page 37)

82
DSC programming
If you wish to alter any of the programming,
•
press DSC and select the area, e.g.
TUN.
• Select the function you want to adjust
and press the corresponding key.
Use the rocker switch to select and adjust
the functions described in the following.
The display will show you the setting you
have selected.
Press ENT (Enter) to confirm your entry.
Return to the previous menu to make any
further changes in the DSC menu.
Press DSC to quit the DSC menu.
TUN (Tuner)
Use this menu to make any adjustments to
radio operation.
NAME
Enter your own four-digit names for stored
FM stations.
DEF - Resets function to the default set-
ting (text/frequency)
PREV - Select the entry for a previous sta-
tion preset
CLR - Delete entry
NEXT - Select the entry for the next station
preset
Use the rocker switch to select the entry
position and the character. Following your
entry, move to the next position or press
ENT to complete your entry.
The altered name will now appear in the dis-
play in front of the corresponding station key.
This car audio system has been equipped
with DSC (Direct Software Control) to allow
you to customise certain programmable,
basic settings to suit your personal needs
and preferences and then store them.
The basic settings for this audio equipment
were made at the factory.
In the following you can find an overview of
these settings, so that you can always reset
to them if desired.
The DSC menu is divided into different are-
as.
TUN – Tuner
Settings for radio operation
DISP – Display
VAR – Various
Diverse Einstellungen
KC – KeyCard
CLK – Clock (time)
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr 82