Brother MFC-790CW - Manual (Page 52)

36
5
Entering Fax mode
5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in blue.
The LCD shows:
Press d or c to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
„ Fax Resolution (See page 41.)
„ Contrast (See page 40.)
„ Broadcasting (See page 39.)
„ Preview (See page 38.)
„ Delayed Fax (See page 42.)
„ Batch TX (See page 42.)
„ Real Time TX (See page 41.)
„ Polled TX (See page 91.)
„ Polling RX (See page 90.)
„ Overseas Mode (See page 42.)
„ Glass ScanSize (See page 37.)
„ Set New Default (See page 43.)
„ Factory Reset (See page 43.)
Press the option you want.
Faxing from the ADF
5
a
Press (Fax).
b
Place the document face down in the
ADF. (See Using the ADF on page 21.)
c
Enter the fax number using the dial pad.
You can also enter the fax number by
pressing Speed Dial, press the
number you want and press
Send a fax.
(For details, see How to Dial
on page 75.)
Note
You can preview a fax message before
sending it by setting Preview to On.
For details, See How to preview an
outgoing fax on page 38.
d
Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Sending a Fax
5
FAX/TEL FAX/TEL
Fax Resolution
Standard Standard
Contrast
Auto Auto
Broadcasting
Off Off
Speed Dial History