Buffalo Technology WLI-TX4-G54HP - Manual (Page 22)


Configuration Limitations - Limits what kind of clients may configure the Ethernet Converter.
Checking Prohibit Configuration from Wireless Clients prevents changes to configuration by clients
that are not connected directly to the Ethernet Converter. Checking Prohibit Configuration from
Wired Clients prevents configuration changes being made by any client that is directly connected
to the Ethernet Converter's LAN ports. Checking both boxes makes all further configuration
impossible. The Ethernet Converter must then be initialized before any changes to configuration
can be made. Be careful with these checkboxes!
Initialization and Reboot - This page contains settings that restart and re-initialize the Ethernet
Converter.
Initialize - Initializing the Ethernet Converter restores the
Ethernet Converter's settings to default settings. This will erase
all configuration changes made, including all passwords. All
configuration will have to be redone as though the product were
brand new. You may also initialize the Ethernet Converter with
the INIT button; see page 24.
Restart - Restarting the Ethernet Converter performs a simple
reboot similar to what would occur if the power was cycled off/on
the Ethernet Converter. No settings are lost in this case. It will take about 30-60 seconds to
reboot. The reboot is complete when the wireless LED is continuously lit.
Management