Philips Aspirador con bolsa - Manual (Page 13)

adjusting suction power
During vacuuming, you can adjust the suction power.
- Use maximum suction power to vacuum very dirty carpets and hard
floors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
Infrared remote control (specific types only)
With the infrared remote control, you can set the suction power to one
of 5 different suction power settings.
- When you switch on the appliance, it always starts operating at the
highest suction power setting.
- To reduce the suction power by one setting, press the - button.
To increase the suction power by one setting, press the + button.
Suction power knob (specific types only)
- During vacuum cleaning, you can adjust the suction power with
the suction power knob on top of the appliance
pausing during use
1 If you want to pause for a moment, insert the ridge on the nozzle
into the parking slot to park the tube in a convenient position.
2 If the appliance is equipped with an infrared remote control (specific
types only), press the standby button to switch off the vacuum
cleaner temporarily, for instance when you have to move some
furniture.
3 To continue vacuum cleaning, press the standby button again. The
appliance then starts operating at the previously selected suction
power setting again.
English 13