Recording setups, Setting date and time, Format flash memory – BenQ Joybee 110 User Manual
Page 14: Setting joybee 110 auto-off time, Setting display backlight duration, Setting display contrast, Setting language, Sw upgrade, Buttons lock, Recording setups 10 setting date and time 10
Using the Joybee 110 Digital Audio Player
10
Recording setups
Quality: Here you have four choices to decide the recording quality: High, Mid, Low, and
TVF (TVF, mono audio format. Taking up less memory space to extend recording
time.).
VOR: If you set VOR on, Joybee 110 Digital Audio Player only starts recording when there’s
sound signal detected by in-built microphone. Or Joybee 110 Digital Audio
Player will start recording whenever you start recording.
Exit: Scroll here and press
to go back to Setting menu.
Setting date and time
Press
or
button to increase or decrease the highlighted digits and press
button to
next digits until finish. the display will go back to Setting menu.
Format flash memory
Quick: Executes quick format.
Complete: Executes complete format.
Exit: Scroll here and press
to go back to Setting menu.
Setting Joybee 110 Auto-Off time
You can set your Joybee 110 to turn off automatically when in idle mode for different peri-
ods of time: Never, 1Min, 3Min, 5Min, 10Min. Scroll
or
button to select and press
to confirm.
Setting display backlight duration
You can scroll to choose a auto-off backlight duration here: Always Off, 5Sec, 10Sec, 15Sec,
30Sec. Scroll
or
button to select and press
to confirm.
Setting display contrast
Scroll
or
button to slide the contrast bar and press
to confirm.
Setting language
There are three languages options to choose: Trad-Chinese (traditional Chinese), Simp-Chi-
nese (Simplified Chinese), English. Press
or
button to select and press
to con-
firm.
SW Upgrade
Please connect to http://BenQ.com to know more about it.
Buttons Lock