Bose Lifestyle Surround Sound Speaker System - Manual (Page 13)

AM262842_00_V.pdf December 20, 2001 11
Setting Zone 2 Protocol
For the Lifestyle ® powered speaker system to work properly with a Lifestyle ® media center,
you will need to check the Zone 2 Protocol to ensure that it is set to Normal mode.
1. While your Lifestyle ® system is on, press the Settings button (Figure 12b) on your remote
control. This will open the on-screen display.
2. Scroll down with the down-arrow button and select System Setup using the Enter button.
3. You will now see a menu entitled System Setup (1 of 3). Scroll down to “more...”.
Continue to scroll down through (2 of 3) to (3 of 3). The last item on System Setup (3 of 3)
is Zone 2 Protocol.
4. If necessary, use the right-arrow button to set the protocol from Legacy to Normal.
5. If you changed the Zone 2 Protocol, turn off the system and turn it on again; this ensures
that the Zone 2 Protocol is reset to Normal mode.
Connecting power to your system
CAUTION: If you purchased a dual-voltage system, it is important that you set the speakers
to the correct voltage. To do this, refer to “Selecting the correct voltage” on page 5.
Follow these steps to connect power to your Lifestyle ® powered speaker system:
1. With the volume control on the left speaker turned all the way down (counterclockwise),
plug the power cord from the left speaker into an AC power (mains) outlet.
2. Insert the power cord of the Lifestyle ® system into an AC power (mains) outlet.
3. Set the volume control for the speakers to the two-o’clock position and turn on your
music.
Connecting the speakers
Figure 12b
Setting Zone 2 Protocol
Settings ( )
System Setup
System Setup (3 of 3)
Zone 2 Protocol: Normal
SOURCE / INPUT
MENU / NAVIGATION
Seek
Channel
Chapter
Preset Track Volume
Stop Pause Play PLAYBACK
Tune
Disc
On
Off Mute All Mute
CD/DVD Changer FM/AM
Settings
Enter
1 2 3
4 5 6
7 8 9
0
Shuffle Repeat
TV VCR AUX
Settings
Enter