Bay Technical Associates U140E116-02 - Manual (Page 17)

17
Enter Request :
.1 STATUS
By responding to the menu with a "1" (Status), you can review the current
configuration of the V93A. Below is the default status.
Installed Modules :1,2
Port Select Code is................$BT
Attention Character is.............;
Disconnect Time Guard is...........Disabled
Local Modem Setup :
Rings to Auto-Answer................2
Modem Connectivity Time-out is......Disabled
Login Setup:
Login Password is...................BTA
Strike any Key to Continue
+----+-----------+-----+-----+----+------+-----+---+
|Port| Device |Baud |Word |Stop|Parity|Xon/Xoff|
| | Name |Rate |Size |Bits| |Xmit|Recv|
+----+-----------+-----+-----+----+------+-----+---+
| 1 |HostEIA-232|9600 | 8 | 1 | None |Off |Off|
| 2 |Host MODEM |57.6k| 8 | 1 | None |Off |Off|
+----+-----------+-----+-----+----+------+-----+---+
Strike any Key to Continue
.2 SERIAL PORT CONFIGURATION
By responding with "2" (Serial Port Configuration), you can change serial
configuration for the EIA-232 port on the V93A. The V93A will then
respond with:
Enter Host Device Number (1-2): 1
Module 1 Serial Port Configuration :
+----+-----------+-----+-----+----+------+-----+---+
|Port| Device |Baud |Word |Stop|Parity|Xon/Xoff |
| | Name |Rate |Size |Bits| |Xmit|Recv|
+----+-----------+-----+-----+----+------+-----+---+
| 1 |Device A |9600 | 8 | 1 | None |Off |Off |
+----+-----------+-----+-----+----+------+-----+---+