Introduction, Parts of a guitar, Guitar fretboard diagram – Behringer AC108 User Manual

Page 4: Left-hand position, Installing the vibrato arm

Advertising
background image

4

INTRODUCTION

Welcome to the BEHRINGER family!

We’ll show you how playing a musical

instrument like the guitar can be a lot of

fun. The following pages will help you learn

some guitar basics. You’ll get familiar

with chords that allow you to play well-

known songs. You’ll get the skills you need

to add a musical flair to your life.

PARTS OF A GUITAR

No matter what guitar you use (acoustic

or electric), and no matter what it is

used to play (folk, rock, country, jazz, or

even classical music), the basic parts of

the guitar are always the same. The

illustration to the right shows you what

these parts are called. Take some time

to familiarize yourself with those! Knowing

those parts by name will help you

understand what you read in this book

and elsewhere.

GUITAR FRETBOARD DIAGRAM

Fretboard diagrams are like road maps for playing

the guitar. They show you what notes to play and

what strings to strum. Take note of how the diagram

represents the guitar fretboard.

LEFT-HAND POSITION

Left-hand fingers are

numbered 1 to 4, be-

ginning with the index

finger. Always press

the strings with the tips

of the fingers; keeping

your fingernails short

will make your life a lot

easier.

INSTALLING THE VIBRATO ARM

Carefully insert the threaded end of the vibrato arm into the arm socket in the bridge (see diagram above for the correct

position). Rotate the arm clockwise until it is firmly (but not too tightly) attached. The arm swing can be adjusted (some

players prefer a loose arm swing) by turning it counter-clockwise one turn. Depressing the vibrato arm (while playing the

instrument) lowers the pitch and pulling up on the arm will raise the pitch.

Advertising