Brother DCP-373CW - Manual (Page 2)

2
2
Attachment of the cover
of the control panel
a
Attach the cover of the control panel to the
machine.
3
Load plain A4 paper
a
Pull the paper tray completely out of the
machine.
b
Lift the output paper tray cover.
c
With both hands, gently press and slide the
paper side guides
a and then the paper length
guide b to fit the paper size you are loading in
the tray.
Make sure that the triangular marks
c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
e
Check that the paper is flat in the tray.
f
Gently adjust the paper side guides to the
paper with both hands.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support until it clicks, and then unfold
the paper support flap.
3
2
3
1
IMPORTANT
DO NOT push the paper in too far.