Philips PowerPro Duo Aspirador vertical 2 en 1 sin cable User Manual
Page 7
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations regarding exposure to
electromagnetic fields.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service or go to your Philips
dealer. You can also contact the Philips Consumer Care Centre in your country (see the worldwide
guarantee leaflet for contact details).
Environment
- This symbol means that you must not throw away the appliance with the normal household
waste. Dispose of the appliance at an official collection point for electrical appliances. Correct
disposal helps to preserve the environment (Fig. 1).
- This crossed-out wheeled bin means that the appliance contains built-in rechargeable batteries
that cannot be disposed of with normal household waste. Follow the instructions in section
‘Removing the rechargeable batteries’ to remove the batteries. If you are unable to remove the
batteries yourself, take the appliance to an official collection point or a Philips service centre to
have the batteries removed. Dispose of the batteries at an official collection point for batteries.
Correct disposal of the batteries helps to preserve the environment (Fig. 2).
Removing the rechargeable batteries
Batteries may explode when exposed to high temperatures or fire.
Only remove the rechargeable batteries if they are completely empty.
You can remove the rechargeable batteries in the following way.
1
Let the handheld vacuum cleaner run until it stops.
2
Remove the dustbin and the cyclone from the handheld. (Fig. 3)
3
Undo 2 screws from the inside of the handheld vacuum cleaner (Fig. 4).
4
Turn the handheld vacuum cleaner and remove 4 screws. (Fig. 5)
5
Remove the back panel from the handheld vacuum cleaner (Fig. 6).
6
Insert a screwdriver and push it down to remove the panel on the left side of the appliance (Fig. 7).
7
Remove 2 screws from the bottom (Fig. 8).
8
Remove 4 screws om the left side of the appliance (Fig. 9).
9
Remove the left housing part (Fig. 10).
10
Take out the battery pack and cut the wires connected to the rechargeable batteries one by
one (Fig. 11).
Guarantee and support
If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
ENGLISH
7