Brookstone Off the Hook Bluetooth Handset 678235 Red - Manual (Page 8)

PaIRInG The hanDseT WITh YoUR Phone
note: Your device must be Bluetooth enabled to work with the handset.
1 . Refer to your cell phone manual for instructions on how to use the Bluetooth
pairing function in your phone .
2 . Push and hold the silver button on the Handset . After 5 seconds you will hear a
high-tone beep, and the blue LED Indicator light on the Retro Handset will blink
briefly . Continue holding the silver button until you hear a low-tone beep and the
blue LED illuminates solid blue . The Handset is now in pairing mode .
3 . Follow your cell phone’s instruction manual to pair your cell phone with a
Bluetooth device and initiate its pairing process .
4 . Your cell phone should scan for local Bluetooth devices and should locate the
Handset "H680" after 10-20 seconds .
5 . Your cell phone will then prompt you to enter a PIN number . Enter "0000" .
6 . Complete the Bluetooth pairing by following your cell phone’s instructions .
7 . Now you will be able to place a call using your cell phone's keypad, internal
phonebook, or voice dial and use the Off The Hook Handset in place of your cell
phone’s handset .
note: If you power-off your cell phone, you may need to reconnect.
7