BIONAIRE BT40RC - Manual (Page 4)

OPERATING INSTRUCTIONS
(FOR REMOTE VERSION)
Step 1: Insert 2 AAA batteries into the back of the remote control.
Remote Control: Your remote control requires 2 AAA batteries for
operation. To install the batteries, simply depress the back of the
remote with your thumb on the spot marked OPEN. Insert batteries
according to the diagram shown inside. Replace cover.
Step 2: Set the fan on a dry level surface.
Step 3: Plug cord into any standard 120V AC outlet.
Step 4: To turn the fan on press the POWER button on the remote
control or on the control panel.
Step 5: The speed is adjustable by pushing either the speed button on
the remote control, or on the SPEED button on the control panel.
Push this button once for LOW, again for MEDIUM, and a third time for
HIGH. Push a fourth time to repeat the sequence. To turn the fan OFF,
push the OFF button on the remote control, or on the control panel.
Step 6: To oscillate the fan head, push the button marked OSCILLATE
on the remote, or OSCILLATE on the control panel. Push a second
time to stop oscillation.
Step 7: This fan comes equipped with a 15 level speed-setting timer.
The first time you press the TIMER button it will be set for a
1 / 2 hour.
From there you can change the TIMER by pressing the button which
will increase one half hour at a time, with the maximum time being 7.5
hours.
Step 8: For a natural breeze movement, push the button marked
BREEZE on the remote control or BREEZE on the control panel. This
will vary the fan speeds faster and slower. By pressing the BREEZE
button a second time, you activate the SLEEP setting. This function
will be random for the first few hours, but will eventually slow the fan
speed down, and when used in conjunction with the timer settings,
will ultimately turn the fan off.
Note: The time can be used in conjunction with several other
functions. For example: SLEEP + 4HR. TIMER causes the fan to
gradually slow down over 4 hours and eventually turn off.
OPERATING INSTRUCTIONS
(FOR NON-REMOTE VERSION)
Step 1: Set the fan on a dry, level surface.
Step 2: Plug cord into any standard 120V AC outlet.
Step 3: Speed Control Instructions
A.) To turn the fan on and have it run continuously, make sure that
the TIMER knob is pointed towards on, and that one of the 3
speed control buttons (I for Low, II for Medium, and III for
High) are pressed down. To turn the fan off in this mode simply
press the button marked OFF.
B.) To turn the fan on and use the TIMER, make sure that the
TIMER knob is set towards the time that you desire, and that
one of the 3 speed buttons (I for Low, II for Medium,
and III for High) are pressed down. See Step 4 for timer use. To
turn the fan off in this mode, either press the button
marked off, or turn the TIMER knob to the position marked off.
Step 4: This fan comes equipped with a 120-minute speed-setting
timer. Turn the TIMER knob clockwise to your desired time set-
ting. Once set, the fan will run until the timer reaches the OFF
position.
Step 5: To oscillate the fan head, push the button marked OSCILLATE
( ). To stop oscillation, press the button again.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for your Bionaire ®
Tower Fan. Please remember:
• Always unplug the fan before cleaning.
• Clean the fan with a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or into the fan motor housing.
• Do not use any of the following as a cleaner: gasoline, thinner,
benzine.
• We also recommend the periodic cleaning of this fan by lightly
running a vacuum cleaner nozzle over the fan grill to remove any
dust or dirt that may have accumulated inside or on the unit.
FAN STORAGE INSTRUCTIONS
In the off-season, it is important to keep your fan in a safe, dry location.
• We recommend using the original (or appropriately sized) box.
• Please remember to protect the fan from dust or moisture.
FAN SERVICE INSTRUCTIONS
1. Do NOT attempt to repair or adjust any electrical or mechanical
functions on this unit. Doing so will void the warranty.
2. If you have any questions regarding this unit’s operation or believe
any repair is necessary, please call 1-800-253-2764 number to
speak with a consumer service representative.
3. If you need to exchange the unit, please return it in its original carton,
with a sales receipt, to the store where you purchased it. If you are
returning the unit more than 30 days after the date of purchase,
please see the enclosed warranty.
3 4
12/20BT40/BT40RC manual.OM1 12.28.2001 01.31pm Page 4