Braun SYNCROPRO 5492 - Manual (Page 6)

6
Keeping your shaver in top shape
Automated cleaning
The Braun Clean&Renew™ (with 7790 and 7785 models
only) automatically takes care of all cleaning and lubrica-
tion needs of your shaver.
Please refer to separate use instructions.
Manual cleaning
For easy cleaning after each shave, switch the shaver
off. Press the release buttons to lift the shaver foil
(do not remove the foil completely). Switch on the shaver
for approx. 5-10 seconds so that the shaved stubbles can
fall out.
For a thorough cleaning (weekly), remove the shaver
foil and tap it out on a flat surface. Using the brush,
clean the cutter block and the inner area of the pivoting
head. About every four weeks, clean the cutter block
with Braun cleaning agents.
If your skin is very dry and you notice a reduced operation
time of the shaver, apply a drop of light machine oil onto
the shaver foil.
Tips for the perfect shave
• We recommend that you shave before washing,
as the skin tends to be slightly swollen after
washing.
• Hold the shaver at right angles (90°) to the skin.
• Stretch your skin and shave against the direction
of beard growth.
• Replace the shaver foil and cutter block every
1 1 /
2
years, or when the parts are worn, to ensure
optimum shaving performance.
oil
10
10
5493324_7790_AMEE_S 4-58 Seite 6 Freitag, 17. März 2006 12:57 12
mikosoft praha s.r.o. mikosoft praha s.r.o.
mikosoft praha s.r.o. mikosoft praha s.r.o.