For network users, Network user's guide chapter map, Restoring the network settings to factory default – Brother MFC-5440CN User Manual
Page 32
30
■ For Network Users
This section is for using the machine on a network.
An administrator should set up the machine using the following steps.
To restore all network settings of the internal Print/Scan server to factory default, please follow
the steps below.
1
Make sure the machine is not operating, then disconnect all the cables from the machine (except
power cable).
2
For MFC-5440CN, press Menu/Set, 4, 0. For MFC-5840CN, press Menu/Set, 5, 0.
3
Press 1 to select
Reset
.
4
Press 1 to select
Yes
.
5
The machine will restart, re-connect cables once this is complete.
Network User's Guide Chapter Map
Windows
®
98/Me
Peer-to-Peer
TCP/IP
Chapter 4
Network Printing from Windows
®
Windows
®
2000/XP
Peer-to-Peer
TCP/IP
Chapter 4
Network Printing from Windows
®
Macintosh
®
TCP/IP
Chapter 5
Network Printing from Macintosh
®
OS2 Warp Server, LAN Server
TCP/IP
Chapter 4
Network Printing from Windows
®
Restoring the Network Settings to Factory Default