Philips Friteuse - Manual (Page 9)

To remove excess oil or fat, shake the basket over the fryer. Put the fried food in a bowl or colander
that contains grease-absorbing paper, e.g. kitchen paper.
 Press the on/off switch to switch off the fryer
The power-on light in the on/off switch goes out.
5 Unplug the appliance after use.
Note: If you do not use the fryer regularly, we advise you to remove the oil or liquid fat. Store the oil or
liquid fat in well-closed containers, preferably in the refrigerator or in a cool place.
Quantities, temperatures and frying times (Fig. 13)
In figure 13 you find an overview of the quantities, frying temperatures and preparation times for
various types of food. Always stick to the information in this table or on the package of the food to
be fried.
cleaning
Let the oil or fat cool down for at least 4 hours before you clean or move the fryer.
Do not use any abrasive (liquid) cleaning agents or materials (e.g scouring pads) to clean the
appliance.
Do not immerse the fryer housing in water, as it contains electrical components and the heating
element.
1 Pull the filter lug upwards and press the tab underneath the lug at the same time to remove
the filter from the lid. (Fig. 14)
 Open the lid.
 Press the lid release tab (1) and lift the lid off the appliance (2) (Fig. 15).
 Lift the frying basket out of the appliance.
5 Remove the condensed water container from the fryer and empty it (Fig. 16).
6 Lift the inner bowl out of the appliance and remove the oil or fat (Fig. 17).
7 Clean the housing with a moist cloth (with some washing-up liquid) and/or kitchen paper.
8 Clean the lid, the filter, the basket, the inner bowl and the condensed water container in hot
water with some washing-up liquid or in the dishwasher.
Note: To clean the filter, you can also leave it in the lid when you clean the lid.
9 Rinse the parts with fresh water and dry them thoroughly.
Dishwasher-proof parts
Lid
Inner bowl
Removable filter
Frying basket
Condensed water container
storage
1 Put all parts back into/onto the fryer and close the lid.
 Roll up the cord, put it into the cord storage compartment and insert the cord in the cord
fixing facility (Fig. 18).
-
-
-
-
-
EnglisH 9