Philips Fer vapeur - Manual (Page 8)

instructions in this user manual, the appliance is safe to use based on
scientific evidence available today.
Before first use
1 Remove any sticker, protective foil or plastic from the soleplate.
2 Rinse and dry the filling cup.
Preparing for use
Filling the water tank
1 Make sure the appliance is unplugged.
2 Set the steam control to position 0 (= no steam) (Fig. 2).
3 Open the cap of the filling opening.
4 Tilt the iron backwards and use the filling cup to fill the water tank
with tap water up to the maximum. (Fig. 3)
Do not fill the water tank beyond the MAX indication.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
, If the tap water in your area is very hard, we advise you to mix it
with an equal portion of distilled water, or to use distilled water
only.
5 Close the cap of the filling opening (‘click’) (Fig. 4).
setting the temperature
1 Specific types only: Remove the heat-resistant protective
cover (Fig. 5).
Do not leave the heat-resistant protective cover on the soleplate
during ironing.
2 Put the iron on its heel.
3 To set the required ironing temperature, turn the temperature dial
to the appropriate position (Fig. 6).
EnGlish 8
4239.000.6215.6.indd 8 23-10-09 10:05