BenQ S670C - Manual (Page 82)

66 Using Your Phone
which you can edit the recipient's number will appear. There are two
ways you can enter the recipient's phone number:
• Key in the recipient's phone number in the number editing screen.
• Before entering any phone number, you can press (Select) and
then select a recipient from the list of contacts in the Phone Book.
Follow the steps below:
a. Press to scroll to the name of contact, and then
press (Select) to select that contact.
b. The display will show all the phone numbers stored for
the contact you selected. Press (Select) to select the
desired phone number.
8
If the number is too long, press to display the
complete number.
c. After the number has been selected, you must press
to return to the list of contacts in the Phone Book. A
check mark will appear beside the contact whose
number you selected as recipient for your message. You
can use the same steps to select the numbers of other
contacts.
d. After you have selected all the numbers you wish to dial,
press and the display will show all these numbers.
4. After the numbers to be dialed have appeared on the screen, press
to use the following options with this message:
• Send Message: Sends the message to the numbers selected previously.
8
When a message is to be sent, a copy of the message will be saved
to the Outbox folder. If the save fails, the "Save to Outbox Failed!"
screen will appear and the send operation will stop.
• Preview: Allows you to view the contents of the message.