Qpresentation, Benq surround, Smartaudio – BenQ S52 User Manual
Page 40
Using the Q-Media Bar
36
QPresentation
When you plug an overhead projector into the VGA port of your Joybook, QPre-
sentation automatically performs the following functions.
1. Detect that the projector has been connected and begin linking up Joybook
with it. This saves you from manually pressing Fn+F3 to establish the link.
2. Determine if the projector is capable of displaying Joybook’s current screen res-
olution. If it cannot, then determine the next best resolution the projector can
handle and automatically reset Joybook’s screen resolution to match that. This
matching of resolutions prevents the screen on Joybook from being cut-off
when displayed on the projector.
By default, QPresentation is turned on. You can turn it off by adjusting its settings
on the taskbar.
1. Locate the QPresentation icon
on the system tray of your desktop.
2. Right click on the QPresentation icon to bring a pop-up dialog.
2. To turn off QPresentation, un-check the Automatic Switch option in the pop-
up dialog.
BenQ Surround
SRS technology brings you NEW Audio Experience. Your Joybook gives you the
feature of surround sound on your system. Powered by the SRS chip inside your
Joybook, you can now enjoy the benefits of surround sound when playing your
music and movies.
By default, BenQ Surround is turned on. You can turn it off by adjusting its set-
tings on the taskbar.
1. Locate the SRS icon
on the system tray of your desktop.
2. Right click on the SRS icon to bring a pop-up dialog.
2. To turn off SRS, select the Turn off SRS option in the pop-up dialog.
SmartAudio
When activated, SmartAudio can reduce microphone noise and cancel the echo
effects during a net meeting. This makes your voice sound clearer.
To activate SmartAudio:
Double click the SmartAudio icon
on the system tray of your desktop. The
following dialog will appear.
•
Click Microphone Noise Reduction to activate the noise reduction function.
•
Click Echo Cancellatioin to enable the echo cancellation function.
To minimize the SmartAudio dialog, click the
icon.