Bayer HealthCare CF-80 - Manual (Page 8)

8.0 Service
Service Tips
1. Make sure ball valve is in ON position.
2. Check tightness of intake line fitting - use pliers if necessary. Make sure there are no
air bubbles in the line.
3. Check discharge hose for any chemical buildup.
4. Make sure the pump hose is in the correct position.
5. Make sure all bolts are tight.
Visual Checklist:
1. Make sure the ball valve is in ON position
2. Be sure all filters are clean.
3. Check tightness of intake line fitting - use pliers if necessary.
5. Check discharge hose for any chemical buildup.
6. ALWAYS flush pump after use with the following guidelines:
A. When using flowable type of chemical, flush with soap and water.
B. When using emulsifying type chemicals, flush with water containing ammonia or
detergent.
Refer to factory recommendations per the pump manufacturer.
Pump Checklist
Troubleshooting