Cord wrap on deluxe charger (specific types only) – Philips Sonicare FlexCare Brosse à dents sonique rechargeable User Manual

Page 9

Advertising
background image

, You hear 1 beep to indicate the Quadpacer has been deactivated or

you hear 2 beeps to indicate the Quadpacer has been activated.

Cord wrap on deluxe charger (specific types only)
If your type includes the deluxe charger cover and base, the travel charger

is pre-installed inside the cover. If you want to shorten the mains cord, you

can store excess cord in the cord wrap feature built into the charger base.

1

To separate the charger cover from the charger base, press the two

grey snap bars on the charger base and pull the white charger cover

upwards.

2

Wrap excess power cord around the grey charger base as shown in

the picture. Be sure to wrap the cord on the inside of the two snap

levers.

3

When you have stored the excess cord, guide the mains cord

through the small groove in the rear of the grey charger base.

4

To reattach the charger cover, press it down over the charger base

until it snaps into place.

Tip: For extra convenience during travel, you can remove the travel charger and

use it without the charger cover and charger base.

Cord wrap on sanitiser with integrated charger (specific types

only)

- If your type includes the sanitiser, you can store excess cord in the cord

wrap feature built into the bottom of the sanitiser.

EnglisH

9

Advertising