Dustbags, Filters, Obtaining replacement items – Philips Aspirateur avec sac User Manual

Page 9: Environment, Guarantee & service, Troubleshooting

Advertising
background image

Super Clean Air HEPA Filter (specific types only)

- Instead of the Super Clean Air Filter, some types are equipped with the special Super Clean Air

HEPA Filter. This filter not only removes household dust, but also harmful microscopic vermin.

- Replace the Super Clean Air HEPA Filter every 6 months.

1

Open the filter grille and remove the Super Clean Air HEPA Filter.

2

Place the new filter behind the brackets. Make sure that the Philips logo on the filter is visible

in the bottom right-hand corner (Fig. 29).

3

Close the filter grille.

Obtaining replacement items

If you have any difficulties obtaining dustbags or filters for this appliance, please contact the Philips

Customer Care Centre in your country or consult the worldwide guarantee leaflet.

Dustbags

Philips Classic s-bag ` paper dustbags are available under type number FC8021.

Filters

Two Super Clean Air Filters and one Motor Protection Filter are available under type number

FC8032.

Super Clean Air HEPA Filters are available under type number FC8044.

Environment

- Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an official collection point for recycling. By doing this, you help to preserve the

environment (Fig. 30).

Guarantee & service

If you need information or if you have a problem, please visit the Philips website at www.philips.com

or contact the Philips Customer Care Centre in your country (you find its phone number in the

worldwide guarantee leaflet). If there is no Customer Care Centre in your country, go to your local

Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care

BV.

Troubleshooting

1 The suction power is insufficient.

- Make sure the suction power knob is in maximum position.

- Perhaps the dustbag is full. Replace the dustbag.

- Perhaps the filters are dirty. Replace the filters.

- The nozzle, tube or hose may be blocked up. To remove the obstruction, disconnect the

blocked-up item and connect it (as far as possible) the other way around. Switch on the vacuum

cleaner to force the air through the blocked-up item in opposite direction (Fig. 31).

English

9

Advertising