Bunn G92T - Manual

USE & CARE INSTRUCTIONS for BrewWISE SM System
(Includes G92T DBC Grinder and DUAL SH DBC Brewer with Smart Funnel™)
STEP 1 STEP 2 STEP 3 STEP 4
34481.0000A 01/03 ©2003 Bunn-O-Matic Corporation 34481 011403
Select the desired batch
size and coffee flavor on
the grinder. It is not nec-
essary to select a size on
the brewer.
Discard the grounds and
filter when brewing is com-
pleted. Momentarily press and re-
lease the BREW button.
Place an empty server un-
der the funnel.
Slide funnel into the fun-
nel rails. The brewer reads
the batch size and flavor
ground through a chip in
the funnel handle and will
automatically select the
correct settings to brew. Grind the proper amount
of fresh coffee into the
Smart Funnel™ using the
G92-HD with Smart Fun-
nel™ operation. Insert a BUNN ® filter into
the funnel.
A batch size must be cho-
sen at the brewer when
grounds are not obtained
from a Smart Funnel™
compatible grinder.
STEP 5
STEP 6 STEP 7 STEP 8 STEP 9 STEP 10
Level grounds by gently
shaking.
Press the ON/OFF button
to ON.
STEP 2 STEP 4
Clean mineral deposits and
rinse. Using a paper clip,
make sure all holes are
open. Replace sprayhead.
STEP 1
Remove the sprayhead.
STEP 5
Use a clean damp cloth
rinsed in nonabrasive,
mild detergent to clean all
surfaces. Remove the lid of the
server.
STEP 3
Reinstall the sprayhead.
CLEANING
BUNN ®
COFFEE BREWING