Blaupunkt CANBERRA 7 647 523 310 - Manual (Page 29)

58
Display | External audio sources
Display
If you switch on the vehicle illumination,
the display brightness switches day mode
to night mode. This requires that your car
sound system is connected as described in
the installation instructions. Your vehicle
must feature the corresponding connection
option.
Adjusting the display brightness
You can adjust the display brightness sepa-
rately for night (DIM NIGHT) and day (DIM
DAY) in steps ranging from 1 to 16.
Press the M/OK button
>.
The display shows "MENU".
Press the or button
5 repeatedly
until "DIM DAY" or "DIM NIGHT" appears
on the display.
Press the M/OK button
> to display the
submenu.
"DIM DAY" or "DIM NIGHT" and the currently
set value are displayed.
Press the or button
5 to adjust the
brightness.
When you have fi nished making your chang-
es,
press the M/OK button
>.
To exit the menu,
press the ESC button
6 or wait approx.
8 seconds.
u
u
u
u
u
u
External audio sources
External audio sources, such as portable CD
players, MiniDisc players or MP3 players,
can be connected to the device in two
ways.
1. To the rear AUX-IN input (if no CD
changer is connected to the device).
The SRC button
? allows for select-
ing the rear AUX-IN input. The display
then shows "CD / AUX-IN".
Note:
An adapter cable is needed to connect
an external audio source to the rear
AUX-IN input. You can obtain this cable
(Blaupunkt no.: 7 607 897 093) from
your Blaupunkt dealer.
2. To the front AUX-IN socket.
As soon as an audio source is connect-
ed to the front AUX-IN socket, it can be
selected with the
SRC button
?.The
display then shows "FRONT AUX-IN".
02_CanbSydMelbSD27_eng.indd 58 02_CanbSydMelbSD27_eng.indd 58 15.01.2007 15:00:02 Uhr 15.01.2007 15:00:02 Uhr