Bosch BOSCH PB360S - Manual (Page 12)

12
Use of 12V Outlet
Note: Do not insert any device that pulls more than 1 Amp
or else the fuse will open. 12V outlet will not operate
from battery pack.
1. Lift the rubber lid marked with 12V of the jack and insert
the plug of the device or the appliance.
2. Close the lid as soon as you finish using the outlet to
prevent any other things from entering the jack.
3. If no power is available then check fuse.
Changing fuse
1. Unscrew fuse cap in counterclockwise direction.
2. Replace fuse. Replace only with a metric 5x20mm fast
acting 1 Amp fuse (F1AL 250V).
3. Tighten fuse cap assembly in clockwise direction.
Do not bypass the fuse or use any other
fuse except what is specified, as it may
cause damage to the unit.
Changing Clock Batteries
1. Open battery bay door.
2. Remove AA battery cover.
3. Remove old batteries and dispose of properly.
4. Insert new AA batteries. Do not use mismatched
batteries, use only new Alkaline batteries.
12V
AUX 1
IN LINE
OUT
250V
1AMP
FUSE
FOR 12V
OUTLET
USB
SD / MMC
AUX 1 IN
LINE OUT
Problem Checkpoint Remedy
Audio Unit doesn’t 1. Is power cord properly connected ? 1. Plug in AC power cord.
function.
2. Is the Bosch battery pack installed or 2. Make sure battery is completely inserted.
inserted properly?
3. Does the battery need charging? 3. Plug in power cord and insert battery.
It is noisy or weak 1. Is there any facility interfering with 1. Move unit to new location away from
in radio receiving. the unit. interference.
2. Is there any interference to the 2. Turn the unit in different directions.
internal FM antenna?
12V DC outlet 1. Is 1 amp fuse properly inserted? 1. Insert 1 amp fuse.
doesn’t function 2. Has the 1 amp fuse blown open? 2. Replace fuse.
4-Way Power outlet 1. Is power cord properly connected? 1. Plug in AC power cord.
does not function
2. Is green light illuminated on outlets?
Does unit suddenly 1. Is power cord properly connected 1. Plug in power to unit.
fail to work to unit?
2. Is the LCD displaying that there is 2. Software in unit needs to be reset. Remove all
power to the unit? batteries from unit and unplug AC power cord, wait
for 30 seconds and reconnect AC power cord.
Trouble Shooting Guide
REPLACE AA BATTERY
WHEN UNIT NO LONGER
KEEPS CORRECT TIME
LOCATION OF AA
BATTERIES
WARNING !