Philips Filtre sortie - Manual (Page 2)

ENGLISH
Washing instructions for HEPA 12 washable filter
1 Rinse the pleated side of the HEPA 12 filter under a hot
slow-running tap (Fig. 1).
Hold the filter in such a way that the pleated side points
upwards and the water flows parallel to the pleats. Hold the
filter at an angle so that the water washes away the dirt inside
the pleats (Fig. 2).
Turn the filter 180° and let the water flow along the pleats
in opposite direction.
Continue this process until the filter is clean.
Note: Cleaning does not restore the original colour of the filter, but
does restore its filtration power.
Never clean the washable filter with a brush (Fig. 3).
2 Carefully shake the water from the surface of the filter. Let
the filter dry at least 2 hours before you put it back into the
vacuum cleaner.
Note: The HEPA 12 filter can be cleaned max. 4 times. Replace the
filter after it has been cleaned 4 times.
-
-
-
432200286862.indd 2 27-08-2008 09:52:26
4322.002.8686.2 2/40