Brinkmann Solar Max 822-0408-0 - Manual (Page 6)

5
Changing Battery
It is important that the solar panel is kept free of
dirt and debris. A dirty solar panel will not allow
the battery to fully charge. This will shorten the
life of the battery and cause the light to
malfunction. Clean regularly with a dampened
cloth or paper towel.
Cleaning
IMPORTANT: The EPA Certified RBRC ® Battery
Recycling Seal on the nickel-cadmium (Ni-Cd)
battery contained in our product indicates The
Brinkmann Corporation is voluntarily
participating in an industry program to collect
and recycle these batteries at the end of their
useful life, when taken out of service in the
United States or Canada. The RBRC ® program provides a convenient
alternative to placing used Ni-Cd batteries into the trash or the
municipal waste stream, which may be illegal in your area. Please
call 1-800-8-BATTERY™ for information on Ni-Cd battery recycling and
disposal bans/restrictions in your area. The Brinkmann Corporation’s
involvement in this program is part of our commitment to preserving
our environment and conserving our natural resources.
Housing Plate
Top Housing
Lens
Battery
Step 1
Remove lens from top housing by turning
lens counter-clockwise.
Step 2
With top housing upside down (solar panel
facing down), unlock housing plate by
turning counter-clockwise.
Step 3
Remove battery. Replace with new Ni-Cd
rechargeable battery.
Step 4
Lock housing plate by turning clockwise.
Step 5
Attach the lens by aligning the slots with
the grooves in top housing. Turn clockwise
to lock in place.
NOTE: These lights utilize L.E.D. (Light
Emitting Diode) technology. There are
no bulbs to replace.