Bush Hog 225 - Manual (Page 26)

ASSEMBLY
225 Series 09/10 Assembly Section 3-2
© 2010 Alamo Group Inc.
ASSEMBL
Y
Assembly of Moldboard to Mainframe
The Bush Hog 225 Series Blade is shipped in two
bundles. The Mainframe, A-Frame and Moldboard
Carrier are in one bundle; the Moldboard is in the
second bundle. The assembly of the Moldboard to
the Moldboard Carrier is made by inserting the
Moldboard Pivot Pin and securing with Bolts.
Until Hydraulic Cylinders are connected and under pressure or Manual Adjusting Links are
installed, block Moldboard to Moldboard Carrier to prevent possible tilting and falling from
stand.