Bushnell 362000 - Manual (Page 7)


ONIX Parts Identification/Overview
Battery
Compartment
Accessory
Socket
Zoom Button: Zoom
the view closer in
or further out on
maps and photos by
pressing the top or
bottom part of the
zoom control button.
5-Way Button: Used to navigate on
screen, select from menu options,
and create waypoints. Press up/
down arrows to select items in a
menu, right arrow to view submenus
(if available), left arrow to exit the
menu. Press the “OK” center button
to confirm a menu selection or turn
an option on or off. Press the center
“OK” button to set a waypoint.
Page View Button:
Flips through the 4
basic screens (SAT,
MAP, NAV, SET).
Hold down to see
display options in
MAP & NAV screens
“Hot” Button: controls all actions
(navigation, initiate “Where Am I”
feature, activate SafeTrack, etc.)
Power Button: located on
right side of ONIX. Push
to turn on. Once the unit
is on, pressing the power
button again will turn the
backlight on and off. Push
& hold button for 2 sec to
turn power off.
USB Port: connect to PC
with supplied cable
SafeTrack/GPS Signal
Indicator Light (pg.18)