Brother VERSION 0 MFC-J6510DW - Manual (Page 76)

70
c
Lift the Jam Clear flap (2), and then
clean the back side of the Paper Feed
Rollers (1) with a soft lint-free cloth
moistened with water.
After cleaning, wipe the rollers with a
dry, lint-free soft cloth to remove all
moisture.
d
Put the paper tray firmly back in the
machine.
e
Re-connect the power cord.
Note
Do not use the machine again until the
rollers are dry. Using the machine before
the rollers are dry may cause paper feed
problems.
Cleaning the paper pick-up
rollers
A
a
Unplug the machine from the AC power
outlet.
b
Pull the paper tray completely out of the
machine.
Note
If the machine starts multiple-feeding the
last few sheets of paper in the tray, clean
the Base Pad (1) with a soft, lint-free soft
cloth moistened with water.
After cleaning, wipe the pad with a dry,
lint-free soft cloth to remove all moisture.
1
2
1